HNC512-VBA32-LPR
Click Image for Gallery
HNC512-VBA32-LPR
| Specifications | ||
|---|---|---|
| Model Number | HNC512-VBA32-LPR | |
| Image Sensor | 1/2.8″ progressive scan CMOS | |
| Min. illumination | 0.005 Lux @ (F1.4, AGC ON), 0 Lux with IR | |
| Shutter time | 1s ~ 1/100.000s | |
| Lens | 8-32mm @ F1.4 angle of view: 31.2°~10.2° | |
| Day & night | ICR | |
| Digital noise reduction | 3D DNR | |
| Wide dynamic range | 140dB | |
| Backlight compensation | Yes, zone configurable | |
| Video compression | H.264 / H.264+ / MJPEG / MPEG4 | |
| H.264 compression profile | Main profile | |
| Bit rate | 32 Kbps ~ 16 Mbps | |
| Dual stream | Yes | |
| Max. image resolution | 1920 x 1080 | |
| Frame rate | 60Hz: 60fps (1920 x 1080), 60fps (1280 x 720) | |
| Image settings | Saturation, brightness, contrast, sharpness adjustable through client software or web browser | |
| On board Storage | Built-in Micro SD/SDHC/SDXC card slot, up to 128 GB | |
| Audio | 1/1 | |
| Alarm | 1/1 | |
| Alarm trigger | Motion detection, tampering alarm | |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1x, Qos | |
| System compatibility | ONVIF, PSIA, CGI | |
| General functionalities | User authentication, watermark | |
| Communication interface | 1 RJ45 10M/ 100 M Ethernet interface | |
| Operating conditions | -30°C ~ 60°C (-22°F ~ 140°F) humidity 90% or less (non-condensing) | |
| Power supply | 12 VDC ± 10%, PoE (802.3at) | |
| Power consumption | Max. 15W | |
| Ingress protection | IP67 | |
| EXIR range | up to 360ft | |
| Dimensions | 100×103.9×311.8mm (3.93″x4.09″x12.28″) | |
| Weight | 2000g (4.41 lbs) | |
| Electrical Box | HTH-260ZJ | |
| Pole | HTH-275ZJ | |
| Corner | HTH-276ZJ |