●1200Mbps Wireless Outdoor Access Point ●2 x 10/100Mbps Ethernet Ports ●300Mbps at 2.4GHz + 867Mbps at 5GHz ●Support IP65 Weatherproof ●Support Fit/Fat working mode ●Support mesh technology ●Support AP controller and cloud management
Model
WI-AP316
Hardware Specifications
Wireless Standards
802.11ac wave2/wave1
802.11n/b/g/a
Operating Bands
2.4GHz & 5GHz
Antenna
2.4GHz:5dBi, 5GHz: 5dBi
Spatial Steams
2.4GHz：2x2 MIMO 5GHz：2x2 MIMO
Signal Rate
Up to 300Mbps at 2.4GHz
Up to 867Mbps at 5GHz
Receiver Sensitivity
2.4GHz:：
11n: -65dbm@MCS7, -88dbm@MCS0.
11g: -72dbm@54Mbps, -89.5dbm@6Mbps.
11b: -92dbm@11Mbps, -94dbm@1Mbps.
5GHz :
11a: -72dbm@54Mbps, -88dbm@6Mbps.
11n@HT20: -65dbm@MCS7, -87.5dbm@MCS0.
11ac@HT80:-55.5dbm@MCS9, -79dbm@MCS0.
Maximum Transmit Power
<23dbm
Interface
(2)10/100 Base-T Ethernet ports
Power Supply
DC 12V/1A (Not Included)
24V Passive PoE
Power Consumption
< 10W
Installation
Pole/Wall mounting
External buttons
reset button (long press for 8 seconds to restore the factory default configuration)
Dimensions
340mm * 85mm * 35mm
Environment
Operating Temperature: -40°C～55°C
Storage Temperature: -40°C～70°C
Operating Humidity: 5% ～ 95% (non-condensing)
Storage Humidity: 5% ～ 95% (non-condensing)
Software Features
Operating Mode
Fit AP, Fat AP
Wireless Function
Up to 16 SSIDs
Support SSID hiding, enable/disable wreless radio
Manual and automatic channel assignment
Manual and automatic bandwidth assignment
TxPower control
One-click mesh
Roaming
Support Layer 2 roaming
Wireless Security
Captive portal authentication
Static blacklist and whitelist
Wireless isolation between clients
SSID to VLAN mapping
Support 802.1X
WPA/WPA2/PSK/WPA/WPA2-Enterprise
Internet Connection Type
Support Static IP, DHCP, PPPoE Dial Up
Management
Support local management with web
Support centralized management with AC
Support remote management with Wi-Tek cloud platform
